Thanks to manufacturers, who are continuously intending and designing precise cooling solutions for industrial applications.
Made in India cooling towers are ideal heat exchanging devices used in places like power stations, air conditioning units, and chemical plants. Industries in India are using cooling towers to prevent their machines from overheating due to consistent operations.
In power stations, professionals are producing electricity using steam. It is when steam drives a turbine, electricity is produced. However, the steam used for production must be condensed before it can be returned to the boiler to continue steam cycle and electricity production. The condensation occurs inside a heat exchanger.
The heat transferring allows cooling down the devices and sets the temperature lower than the ambient temperature. This is the benefit that users cannot expect from dry coolers. Cooling water is needed in heat exchanger and the cooling water is travelled through the tower. With this approach, water for the steam turbines and boilers kept separate from cooling water to prevent impurities hitting the turbine steam.
Distinct range of cooling towers manufacturers are designing
Cooling towers are typically intended for specific purposes. Not all cooling towers work for all applications or induestries procedures. Here we help you to understand the different types of cooling towers and which type is ideal for your modern procedure. Look at the following list.
- Mechanical or Natural draft
Mechanical or natural draft cooling towers make use of the chimney operation in which air flow is done by the temperature difference between the air outside and inside the cooling tower. Ther are main two type of Natural draft cooling tower spray type and splash deck. Spray type generaly used for housed inside a box-shaped and splash deck are very similar to that of the spray type but it 20-30% more effective than the spray type.
- Forced draft & Induced Draft
Induced draft or forced draft equipped with inlet fan installed at the top of the tower. Such towers often use axial fans. On forced draft cooling towers, air push and through by blowers situated at the base of the air inlet face on Forced draft towers.
- Cross flow
In cross flow towers, water flows vertically through the fill. And the air flows horizontally across the falling water flow.
- Counter flow
In this cooling tower, air flows vertically upward due to which, it is impossible to use open basins in cross flow design. These towers are instead using pressurized, pipe-type spray systems to spray water on the top of the fill. The pipes and cooling tower nozzles are generally spread farther apart so they will not restrict any air flow.
Just in case you have query about cooling towers, contact Tower Tech global experts today. The company is leading manufacturer of cooling tower in India as it has a wide variety of products at competitive rates. Go, get your suitable deals today!